Creating coastal, rustic vibes in our Master Bedroom with a wood wall
Today I am sharing ANOTHER DIY accent wall! This one is in our Master bedroom. I swear I am official the queen of the wood wall. I promised I was done with wood on walls, but here we go again!
A soft, coastal, rustic vibe is what I am going for in our Master Bedroom at the Lake House. Coastal translates different ways to each person but for me when I think coastal I think soft blues and grey mixed with lots of creams, whites and woods with gorgeous light streaming everywhere. I find those colors soothing and peaceful.
I chose wood (once again) because I love the instant texture wood brings into a space. I also decided I needed to run the boards vertically to take advantage of the 10 ft ceilings in the bedroom.
This is what we used and how we did it.
I knew I wanted a "whitewashed" shabby chic feel for the wall. I found the left over paint samples we had from various projects and the colors were perfect and a bonus they were free! I poured small amounts of paint into cups and added water until it was the desired consistency and simply wiped it on using a rag. I kind of eyeballed this step keeping the grain in the wood showing is your goal. If you want a solid coverage you would paint. This idea of whitewash is more of a sheer coverage. As you can see below I use A LOT of paint samples when choosing paint! ;)
We used all the old paint samples left over from choosing wall colors (which as a bonus ties the colors throughout the house).
We are using 12 ft boards for our 10 ft ceilings. We trimmed a little over an inch off the bottoms. Check before painting to see if any boards are warped. We found two that we were able to turn around and use anyway.
Love leaving the knots in the boards to show through the whitewash.
Lightly coating the boards with paint
Once the boards were painted I left them to dry the garage. Once dry, I lined them up against the garage wall the way I wanted them on the bedroom wall. It made it so much easier when we went to install them and allowed for me to play around with color and texture a bit before we installed them.
We used a pneumatic nailer to attach the boards directly to the wall. This is my 5th or 6th accent wall so we actually purchased this pneumatic nailer last year. You can also rent them from your local Home Depot. I wanted to run the boards vertically to draw attention the the 11 ft ceilings.
Sorry about the poor lighting it was getting late.
The very last board needed to put cut smaller to fit. Other than that due to some careful planning by my Engineer husband the wall required very few cuts.
Last board needed to be cut to fit the space.
Here is the final result! We love the texture and warmth it gives to the space. I love the boards vertical and the whitewash color lets the beautiful grain show through.
See a few of our other DIY Walls:
Mid-Century Modern Accent Wall
That's it for now!
See you next time,
-Libbie